machinery, woodworking machinery, cnc woodworking machine
machine, sound-absorbing machine, woodworking machinery and equipment, woodworking equipment, sound-absorbing board equipment, wood edge banding machine, fully automatic sound-absorbing board machine, woodworking drill, side hole machine, CNC drill, side holes woodworking machines and woodworking cutting factory, woodworking drill, woodworking drilling equipment, automatic side hole machine, woodworking machine, furniture cutting machine, automatic cutting machine, woodworking machine equipment, precision cutting board saw woodworking machinery manufacturer - experience sharing
machinery wood porter safety operating rules: 1, with the car carry wood, the car must be good, loading and unloading can't too hard, too, is overweight, the road to clear, personnel should cooperate well, not yank, shoving, rammed.
2, wood stacked neatly, shall not be blocked channel or interfere with the work.
3, when transporting long pole, before and after the left and right sides, should be paid attention to avoid collision equipment and people, be careful when turning slow;
Two or more people carrying expected to shoulder, feeding the shoulder movements are consistent.
4, the big wood should be flat on the ground, no matter standing against the wall.
Round wood to pad, put safety.
Packaging carpenter 1 safety regulations, must wear safety helmet into the scene.
2 no smoking, workplaces, fire protection equipment must be complete and effective.
Comply with the hand used tools, cnc woodworking machine, machinery, grain and equipment safety operation procedures.
3, such as plane, cutting straight rotational part must have a safety device, it is strictly prohibited without authorization remove.
Transient pulse without tools, are not allowed to be placed on the wooden case, raft edge, so as to avoid falling cut legs and feet.
4, packaging large machinery, equipment, can not climb up and down, up and down must use a ladder.
5, lifting and wood packing cases, linked to abide by work safety operation procedures, enclosure should keep level, are not allowed to tilt lifting, not from the head through.
Lifting process finds the hazardous situations such as cracks, slide, should immediately command the crane hook falls in appropriate places.
No crane pull it through the wood.
6, work must be equipped with good lighting at night.
Working place is allowed to use fire to keep warm.
In July and board are not allowed to litter, pins should be in a safe place or remove the nails, bending.
8, included in the above must watch the below if anyone while sawing wood, not allowed to throw down head, objects and hand tools, etc. , so as not to hurt.
Bottom stare blankly and connection screws must be tightened in each part, shall not be missed.
10, boxes production, large quantities, should be put in special box and the box between the bridge plate on the ladder, or nail the fastening beam between two cases, put above the bridge is designed. it can work.
11, after work, should clean up all kinds of tools objects, materials, clean around to clean up the good work, timely and sawdust is carried out.
Jinan Ludiao CNC Equipment Co., Ltd. in the right situation can streamline the entire process, enabling your team to deliver higher quality work in a shorter amount of time.
Excellent quality yet affordable best at Ludiao CNC Equipment . Don't miss out!
In various different types of oem cnc wood cutting machine, oem cnc wood cutting machine metal cutting machine is one of the most commonly used.